OK this is hardly a performance mod but I was getting tired of looking at the worn out paint on my OE hood and engine decklid release levers. So when I stumbled across yet another cheap find on EBay I snatched it up. It is a black on black set of release levers and the…
OK this week we spend a little more time on the brakes. Last time we improved the ability to cool them… now we can try to push the braking system a little harder. I hope the ABS cooperates! We’ll know soon enough as our next test day is at the end of July. So, one…
Earlier we installed GT3 brake ducts to improve cooling. (Shown at left above) However since we drive pretty hard on a regular basis (while instructing at BeaveRun) it has become appearent that still more cooling could be used. This really came to light after we started running Pirelli Corsa track tires and began generating much…
OK so we’ve had this GT3 like, mk1 Aerokit rear wing sitting around for months and finally have found some time to paint it and get it installed. This is an OE factory Aerokit wing found, like the other items, on ebay. It’s made in a small town in France right on the German border…
Now that the GT3 wheels and track tires have been on the car for a while it was time to take a good look at the alignment. So we headed over to our friend’s shop who has a hunter machine. After taking a look we discovered the rear toe was off and that the camber…
We’ve been running the stock mufflers / exhaust system on this 996 ever since we tried the muffler bypass pipes. Those pipes were fine for the track but we just too loud for a daily driver. So when the opportunity came along for us the grab a set of Fabspeed mufflers we took it. Nice…
We found a set of mk1 GT3 wheels from a bloke on Rennlist. (If you dont know about www.Rennlist.com, its the oldest and perhaps best Porsche owners forum on the web) I say mk1 because these wheels are 8″ wide in the front. Later GT3 used the exact same style however the front wheel width…
