Are you Ready to Win ?
This isn’t just another race car, it’s a proven competitor… built to run at the front.
Engineered, refined, and ready for more podiums. It delivers the performance serious racers demands.
So, if you’re ready to step up, your winning starts here !
Sales Details
For sale is the #55 SCCA H Production Bildon Motorsport VW Golf GTI.
Four years of development. Sorted, fast, reliable and very competitive.
Seller: Bildon Motorsport
Location: Pittsburgh, PA – The car is now in a climate controlled storage facility, pending sale.
The sale will be advertised on the ‘VW Club Racers‘ and ‘SCCA Production Car‘ Facebook groups.
If no buyers surface there, it will then go to the Bring-A-Trailer auction site.
What is being sold:
The sale will be for the car as it was last raced at the Pitt Race majors in May where it sat on pole.
The auction includes the car, plus boxes of INCLUDED spares (listed farther below), which will be placed inside the car at the time of sale. There are also OPTIONAL spares available that are shown at the bottom of this page.
The additional & optional spares will be available outside of the BAT auction, and are listed at the bottom of this page. If arranged in advance, the new owner will have first rights on these optional spares.
Once the sale is complete, these additional spares can then be purchased by others.
Interested?
Please reach out on Facebook Messenger or email: sales@apexcompetition.com and questions will gladly be answered.
Note: Be prepared to discuss pricing in excess of what the Loop Racing HP VW brought:
https://bringatrailer.com/listing/1984-volkswagen-scirocco-2/
Car As Sold
Car will be sold as follows:
Built by Bildon Motorsport w/ Interprep motor
Multi race winner / 2025 Majors podium / SCCA Annual Tech through May 2026
We estimate the car is 85-90% of what is required to podium at the Runoffs. Many of these parts can be found in the additional spares section at the bottom of this page. If interested, Bildon will work with buyer to further develop the car at no charge. Phone/Text vehicle support is included with sale.
The Following list is of the major installed parts: (not comprehensive)
ENGINE / TRANS
- 1.8-Liter Inline-Four (1825cc) ~150+ HP
- 8v built on PL (16v) block to utilize piston squirters / case venting
- Ex-Loop racing cylinder head converted to hydraulic with Web cam
- Wiseco custom 82mm pistons on K1 forged steel rods
- Five-Speed (AUG) Manual Transaxle (3.67)
- Fully Heim jointed shift linkage
- Gripper 80/40 Limited Slip Differential
- MS3 Pro Engine-Management System (new 2025)
- Tuned for Sunoco 260GT 100 Octane Unleaded
- Bosch 4x Logic Level Coil (sequential capable)
- New Bosch GM LS Injectors (25lb/275cc) / Adjustable Regulator
- NGK wires, NGK copper spark plugs
- TT header with 2″ stainless primary extensions
- Stainless exhaust from collector back
BODY / COCKPIT
- Welded SCCA legal Roll Cage with Log Books
- Silver / Blue paint w/ Custom Vinyl Graphics
- Carbon-Fiber hood and wide carbon bumper / air dam. (mold is available!)
- OE steel rolled (widened) fenders, with carbon front flares
- OMP Racing Seat w/ 6-Point Harness
- OMP Steering Wheel w/ MPI Quick-Release
- Lifeline Zero 2020 manual release fire system (new 2024)
- RacePak Dash / Logger w/ CAN link to ECU
- Hardwired USB ports for camera / data
- x-Long MS3Pro USB cable for ECU Laptop tuning
- Serial interface on switch panel to program RacePak IQ3
- Additional Innovate MXL OXS gauge mounted & sensor installed
- Floor mounted Optima D34/78 battery (new 2024)
- Bildon Kevlar Floor mat
- Electrical subsystems have Deutsch connectors for ease of service
- Full radio harness, antenna, PTT button on steering wheel.
SUSPENSION / BRAKES
- 13×7″ et0 Panasport Wheels w/ Hoosier GT Pro slicks
- Custom built VWMS / VR6 style LCA suspension
- VWMS style Rear Anti-Toe links
- Rear stub axle spacers and camber shims (with spares)
- Koni custom valved adjustable dampers, springs (700/500), tenders, KW camber plates
- OE four wheel brake discs
- Tilton dual master cylinders
- Wilwood balance bar assembly (cockpit adjustable )
- Tilton rear proportioning valve
- OE calipers with speed bleeders
- Hawk DT60 installed (new Carbone Lorraine CL6 and CL8 spare pads included)
Photos of Car as Sold
Included Spares Package
The following Spare Components will be included with the car (in hatch) at sale:
- CL brake pads (2sets), 4 new GTI rotors, stainless lines, prop valve
- 20+ wheel studs, Jetta GLi & 1 Golf carrier, 5x new hubs, 3x bearings
- Mk3 Tie rods (longer) with stainless spherical rod ends
- Complete CV shafts, left & right (A3 length), Kennedy 4 puck disks
- 3 new inner Lobro CVs, 1 new outer CV, and 6 used outers, 5 used inner CVs
- Water pumps, oil pumps, OE oil pan, engine bearings and gaskets.
- G60 MLS head gaskets (correct for 82mm & 12:1), G60 rubber gaskets.
- OE Valves, springs, shims, light lifters, retainers
- 2 Oil Cooler Adapters (1 NIB), New flywheel bolts, Dip Stick
- Bosch Ignition coils, NGK wires, NGK plugs
- Fuel Injection parts, injectors, rails, FPRs, wiring
- Water necks, small crank pulley, extra crank damper pulleys
- Extra OE rods, 16v Pistons (from PL blocks), Idle Stabilizer Valve
- Oil filters, Shifter parts, 1x hi pressure fuel pump, 1x in tank pump
- We are still working through this included spares list… $$$$.
Included Spares (photos)
Optional Available Spares
- Set of Bertils lightened OE rods
- VWMS ultra light alloy pressure late (used @ WRC San Remo)
- 2nd gearbox, code: 9A with REM finished gears and shafts. Quaife Helical differential
- 2x OE cranks
- PL block w/ 3rd OE crankshaft & Bertils rods.
- Schrick oil pan
- 2x AA Heads
- 1x G head
- Cam shafts, Solid valve train, Ti retainers,
- New set of 13×7 EvoCorsa Extreme wheels
- Set of 13×6 Compomotive CXR with unused Hoosier 195/530-13 rains.
- Staggered set of 13×7 et13 Front & 13×6 et0 Rear Compomotive CXR wheels.
A complete engine can be built with components above.
This was one day going to be the “A” motor or “runoffs engine”. Only the pistons and machine work are not there.
We can have these components machined and assembled with the correct spec Wiseco pistons for you.
