The amber turn signals were delivered on the earliest Bosters & 996 cars. Personally I dont like them at all. I like the new 997 headlights as they look more “classic 911” however this is a 996 so we’re stuck with what we have. What we can do however is swap out these old faded yellowing headlights for a nice new set of clear lights with smoked turn signals and get rid of the amber. The smoked lights will look much better on our project car’s White/Black color scheme.
How to install 996 Headlights.
It is really simple but I have heard all sorts of stories from people who did no research prior to attempting this and wound up breaking their lights. There are no screws or nuts to remove. You need to use Porsche’s special tool that is included in the tool kit in each car.
First locate the plastic interior nut holding the carpet in place. After you remove the plastic finishing screw you will be able to pull down the carpet. Remove the rubber plug just to the right of the grounding wire to expose the headlight removal socket. In your Porsche Tool kit you will find a hollow ‘hex’ wrench with a handle. Insert the hex head into the socket as show with the handle hanging down.
Turn the handle counter-clockwise until you hear a “click” and see the headlight move out forward. You can then pull the headlight straight forward out of the car. It is located by plastic guide pins in a plastic channel. Assembly is simply the reverse procedure.
